Trang 3 của 3 Đầu tiênĐầu tiên 123
Kết quả 21 đến 24 của 24
  1. #21
    Ngày tham gia
    Aug 2015
    Bài viết
    0
    Trích dẫn Gửi bởi pcnoob
    Titan Quest - Immortal Throne
    Nền: PC
    Phát triển: Iron Lore
    Phát hành: THQ
    Thời gian phát hành: 14-3-2007
    Thể loại: Nhập vai
    Cấu hình tối thiểu: Chip 1,8 GHz, RAM 512 MB, Video Memory: 64 MB, ổ cứng trống 5 GB.

    Quá nhiều lộn xộn và bất cập bên topic "Download TQ-IM" cũ; thế nên hôm nay post một bài hoàn chỉnh về vấn đề: "Download". Dành cho những ai muốn chơi, tìm hiểu, khám phá một game rất đặc biệt - lôi cuốn - hấp dẫn - một thể loại game RPG đỉnh cao: Titan Quest và bản mở rộng Immortal Throne


    Đặc biệt hơn, để thuận tiện cho việc Download game tất cả các link Download TitanQuest & Immortal Throne đều được upload lên host: MediaFire. Bên cạnh đó, bản Download Full còn hỗ trợ thêm đầy đủ các bản Patch và một số Tool để người chơi có thể thuận tiện và dễ dàng hơn trong việc chơi game ngay mà không gặp bất kỳ khó khăn gì!


    Cũng xin được nhắc thêm về "Nguồn" của bản Download TitanQuest & Immortal Throne Full để người chơi có thể yên tâm hơn và không lo mình đang Download một bản game không chất lượng. Bản TitanQuest & Immortal Throne Full được Download từ một sever nước ngoài với dung lượng tổng 5,26Gb (Titan Quest: 3,15Gb và Immortal Throne: 2,11Gb), với ngôn ngữ, âm thanh chuẩn Tiếng Anh người chơi sẽ không cảm thấy phiền toái và khó khăn trong khi chơi (khác hoàn toàn với 1 số bản khác như Tiếng Nga, Hy Lạp...), ngoài ra bản Full còn có đủ *****, patch update 1.30 cho Immortal Throne...Sau khi được chỉnh sửa và bổ sung bản TitanQuest & Immortal Throne + More Application đã hoàn thành và được upload lên host: MediaFire!


    Link download đã được tách ra làm nhiều phần để tiện cho việc download và mục đích download của người chơi!




    Chú ý:




    1.Titan Quest (Total Link: 34; Size a Link: 95,37Mb; Total Size: 3,16Gb)


    MediaFire
    Code:
    ***Hidden content cannot be quoted.***


    2. Immortal Throne. (Total Link: 23; Size a Link: 95,37Mb; Total Size: 2,11Gb)





    ***Hidden content cannot be quoted.***


    3. Torrent Link: TitanQuest & Immortal Throne (Đã test/seed/peer chuẩn; 1 folder/4 files; Total Size: 5,27Gb)... Link Torrent đặc biệt dành cho người chơi nào ngại Click từng đường link và có một đường mạng ổn định!


    Code:
    ***Hidden content cannot be quoted.***

    4. Deamon Tool Lite v4.12.3(Soft tạo ổ ảo perfect). Total Link: 1; Total Size:3,52Mb
    Công cụ không thể thiếu giúp bạn có thể Installs TitanQuest & Immortal Throne một cách nhanh chóng và hiệu quả nhất!


    Code:
    ***Hidden content cannot be quoted.***

    5. Patch: (TitanQuest ImmortalThrone cũng giống như các game thể loại RPG khác đều có những bug- lỗi game. Các bản patch chính là những bản fix lỗi hiệu quả nhất giúp người chơi không cảm thấy khó khăn khi chơi)


    5.1: Update Patch 1.30(dùng cho bản mở rộng Immortal Throne). Rất nhiều bạn không thể chơi TQ-IM do không có bản update 1.30 này.


    Chú ý: Bản patch này không phải patch fix game giống như patch 1.16 và 1.17 mà chỉ là patch update, patch này sẽ tự động chạy khi các bạn chơi game lần đầu tiên (IT), không cần cài đặt. Và version của game sẽ không phải là version 1.30 mà chỉ là version của bản patch fix bug mà bạn đã cài đặt (1.16, 1.17a). Member nào đã download bản IT thì ko cần download patch 1.30 này (Nick cắt riêng phần này dành cho những Mem mua đĩa hoặc download ở nguồn khác bị thiếu. (Total Link: 9; Size a Link: 95,37Mb; Total Size: 800Mb).


    Code:
    ***Hidden content cannot be quoted.***


    5.2: Patch 1.1 to 1.16 & 1.17(Patch fix bug Installs sau khi cài Immortal Throne)
    - Patch 1.1 to 1.16 (Total Link: 1; Total Size: 44,07Mb)
    Code:
    ***Hidden content cannot be quoted.***

    6. Tools (Tiện ích giúp người chơi dễ dàng hơn trong khi chơi. Ở đây là 3 bản TQ Vault- mở rộng hòm đồ của bạn không giới hạn, cùng nhiều tính năng nổi bật khác. Khuyến cáo ít dùng bản 2.20, sẽ làm cho việc chơi game của bạn rất nhanh nhàm chán vì có quá nhiều tính năng ~ cheats)


    6.1: TQ Vault v2.11(Total Link: 1; Total Size: 3,54Mb)


    Code:
    ***Hidden content cannot be quoted.***




    7. NetFramework (Trình hỗ trợ chạy các chương trình .NET. Bắt buộc phải có NetFramework các bạn mới có thể sử dụng TQ Vault)


    7.1: NetFramework 2.0(Chỉ cần cài bản này các bạn có thể sử dụng TQ Vault v2.11. Total Link: 1; Total Size: 22,39Mb)


    Code:
    ***Hidden content cannot be quoted.***




    7.3: Windows Installer 3.1(Khi người chơi cài NetFramework 3.5, PC sẽ cần Windows Installer để chạy Set Up, chạy Windows Installer 3.1 trước khi set up NetFramework 3.5)


    - Windows Installer v3.1 (Total Link: 1; Total Size: 2,41Mb)


    Code:
    ***Hidden content cannot be quoted.***


    Chú ý: Files đã tích hợp đủ 4 trình Xmod: X2 - X3 - X4 - XMax.


    - Ubermod (Một phiên bản khó hơn về mọi mặt, giúp bạn trải nghiệm nhiều hơn và thích thú hơn) (Total Link: 1; Total Size: 31,97Mb)


    Code:
    ***Hidden content cannot be quoted.***


    - VLan (Giúp người chơi có thể chơi Online TitanQuest một cách dễ dàng, tất cả đã có bài hướng dẫn cụ thể trong Box. Total Link: 1; Total Size: 196,18Kb)


    Code:
    ***Hidden content cannot be quoted.***


    - Show All Damage (Hiện nay việc sử dụng SSTQ-Defiler đang lan tràn. Việc duy nhất SSTQ-Defiler đem lại tốt là chức năng "Show All Damage". Mod Kim đã tích hợp, chỉnh sửa để cung cấp 1 file cũng có chức năng tương tự. Hy vọng từ nay các bạn sẽ không phải sử dụng Defiler.)


    Code:
    ***Hidden content cannot be quoted.***


    - Underlord 1.52 Full Version (Manual Package) (New Update)


    Direct Link:
    Code:
    ***Hidden content cannot be quoted.***
    thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa a

  2. #22
    Ngày tham gia
    Aug 2015
    Bài viết
    2
    • Họ tên: …Phạm hồng Đài……… Bộ phận: …Thi công …………………

      Công trình: …GALAXY9 Q4………… Hạng mục: Đóng kho tạm ………

      Nội dung đề xuất: máy hàn và đồ nghê làm kho.




      Stt

      Nội dung

      ĐVT

      S.lượng

      Đơn giá

      Thành tiền

      Ghi chú



      1

      Máy hàn điện

      cái

      1



      +dây và kềm hàn+mặt nạ



      2

      Dây nguồn 2Cx6mm2

      m

      30



      Cho máy hàn



      3

      Máy cắt bàn

      cái

      1






      4

      Vis bake

      cái

      2






      5

      Vis dẹp

      cái

      2






      6

      Chuôi cắm công nghiệp

      cái

      3





      7

      Búa

      cái

      1






      8

      Mũi khoan sắt 4.5mm

      cái

      4






      9

      Mũi khoan sắt 8mm

      cái

      1






      10

      Máy cắt cầm tay D100

      cái

      1



      +có miếng bảo vệ



      11

      Máy khoan sắt

      cái

      1






      12

      Máy khoan bê tông

      cái

      1






      13

      Mũi khoan bê tong D12mm

      cái

      2






      14

      Đá cắt D100

      cái

      4






      15

      Đá cắt D350

      cái

      5






      16

      Thùng đựng đồ nghề có khóa

      thùng

      1






      17

      Dây nguồn 2Cx2.5mm2

      m

      40






      18

      Cơ lê M14

      cái

      2






      19

      Mỏ lếch

      cái

      1










































      TỔNG CỘNG





      Ngày nhận: 22-12-2014……………………..

      Ngày trả: ……………………………………



      Tổng số tiền bằng chữ:………………………………..…… …………………………………………

      Thái Đức Lâm, ngày 22 Tháng 12 Năm2014

      Duyệt Kế toán PT Bộ phận Người đề nghị






      Phạm hồng Đài

      dai0909, 7/5/15Báo cáo
      #10ThíchTrả lời
      duongpham2411 and kientini like this.

  3. #23
    Ngày tham gia
    Aug 2015
    Bài viết
    3
    Generation and maintenance of registers

    Management of routine testing and approvals process

    Conformance and non-conformance procedures

    Management of conformance and acceptance by the Engineer

    Management of non-conformance

    Management of remedial works proposals and acceptance by the Engineer

    Monitoring of remedial works and subsequent acceptance by the Engineer

    These activities are expected to be included or referred to in “work” or “inspection” sheets issued to the Contractor’s supervisory staff on site and to the Engineer attached to the relevant notices issued by the Contractor.

    The QA engineer is expected to ensure that the Contractor’s staff comply with the QA procedures. The QA engineer is expected to check QA documents prior to submission to the Engineer for approval. Any such checks shall include conformance / non-conformance procedures. The Contractor is expected to advise the Engineer if any non-conformance is recorded. In the case of non-conformance the Contractor shall put forward remedial measures for the acceptance of the Engineer. No remedial work shall commence until such acceptance has been given. The Contractor should note that it is his responsibility to check and confirm the quality of his work prior to requesting the acceptance of the Engineer.

    The Engineer will confirm acceptance of the Contractor’s QA documents, if appropriate, at “hold points” in the construction process beyond which further work cannot proceed without such acceptance and on satisfactory completion of work items.

    The Contractor should note that the Engineer will carry out his own procedures to confirm the quality of the Works in parallel with the Contractor’s own QA. If the Engineer, during his own quality assurance procedures, detects a non-conformance not detected or not reported by the Contractor “a Notice to Correct” shall be issued in accordance with sub-clause 15.1 of the Conditions of Contract. The affected part of the works will be suspended until such time as a correction is made.

    No payment will be made against work items unless the quality of those items has been assured by the Contractor’s QA procedures. The Contractor shall include in his monthly statements documentation demonstrating that each item for which payment has been requested has complied with the quality requirements of the contract and been accepted as doing so by the Engineer.

    The QA system is considered to be an integral part of the Contractor’s activities and its cost therefore distributed across all bill items. No separate payment will be made for this activity.

    1. PROVISION OF BONDS AND INSURANCE
    The Contractor shall provide Insurance in accordance with clauses 18 of the Conditions of Contract.

    The Contractor shall extend the validity of all bonds and insurance as appropriate should the Works not be completed within the original Time for Completion stated in the Conditions of Contract.

    Payment for the cost of bonds shall not be made separately and shall be considered included in the cost of mobilization.

    The pay items detailed below shall be considered to cover payment in full for the provision of insurance.

    Pay Item Description Unit

    01100-01 Provision of Insurance provisionalsum

    The Contractor shall submit a copy of insurance policies for approval by the Employer for payment before carrying out the work. The percentage for the Contractor’s overhead charges and profit shall be fixed at 5% for this work, and is included in the provisional sum amount shown in the Bill of Quantities.

    2. MOBILIZATION AND DEMOBILIZATION
    2.1 DESCRIPTION
    This section consists of the general provisions for the mobilization and demobilization work by the Contractor.

    2.2 REQUIREMENT
    Generation and maintenance of registers

    Management of routine testing and approvals process

    Conformance and non-conformance procedures

    Management of conformance and acceptance by the Engineer

    Management of non-conformance

    Management of remedial works proposals and acceptance by the Engineer

    Monitoring of remedial works and subsequent acceptance by the Engineer

    These activities are expected to be included or referred to in “work” or “inspection” sheets issued to the Contractor’s supervisory staff on site and to the Engineer attached to the relevant notices issued by the Contractor.

    The QA engineer is expected to ensure that the Contractor’s staff comply with the QA procedures. The QA engineer is expected to check QA documents prior to submission to the Engineer for approval. Any such checks shall include conformance / non-conformance procedures. The Contractor is expected to advise the Engineer if any non-conformance is recorded. In the case of non-conformance the Contractor shall put forward remedial measures for the acceptance of the Engineer. No remedial work shall commence until such acceptance has been given. The Contractor should note that it is his responsibility to check and confirm the quality of his work prior to requesting the acceptance of the Engineer.

    The Engineer will confirm acceptance of the Contractor’s QA documents, if appropriate, at “hold points” in the construction process beyond which further work cannot proceed without such acceptance and on satisfactory completion of work items.

    The Contractor should note that the Engineer will carry out his own procedures to confirm the quality of the Works in parallel with the Contractor’s own QA. If the Engineer, during his own quality assurance procedures, detects a non-conformance not detected or not reported by the Contractor “a Notice to Correct” shall be issued in accordance with sub-clause 15.1 of the Conditions of Contract. The affected part of the works will be suspended until such time as a correction is made.

    No payment will be made against work items unless the quality of those items has been assured by the Contractor’s QA procedures. The Contractor shall include in his monthly statements documentation demonstrating that each item for which payment has been requested has complied with the quality requirements of the contract and been accepted as doing so by the Engineer.

    The QA system is considered to be an integral part of the Contractor’s activities and its cost therefore distributed across all bill items. No separate payment will be made for this activity.

    1. PROVISION OF BONDS AND INSURANCE
    The Contractor shall provide Insurance in accordance with clauses 18 of the Conditions of Contract.

    The Contractor shall extend the validity of all bonds and insurance as appropriate should the Works not be completed within the original Time for Completion stated in the Conditions of Contract.

    Payment for the cost of bonds shall not be made separately and shall be considered included in the cost of mobilization.

    The pay items detailed below shall be considered to cover payment in full for the provision of insurance.

    Pay Item Description Unit

    01100-01 Provision of Insurance provisionalsum

    The Contractor shall submit a copy of insurance policies for approval by the Employer for payment before carrying out the work. The percentage for the Contractor’s overhead charges and profit shall be fixed at 5% for this work, and is included in the provisional sum amount shown in the Bill of Quantities.

    2. MOBILIZATION AND DEMOBILIZATION
    2.1 DESCRIPTION
    This section consists of the general provisions for the mobilization and demobilization work by the Contractor.

    2.2 REQUIREMENT

  4. #24
    Ngày tham gia
    Nov 2015
    Bài viết
    7
    thankssssssssssssssssssssssssssssssssssssss

Quyền viết bài

  • Bạn Không thể gửi Chủ đề mới
  • Bạn Không thể Gửi trả lời
  • Bạn Không thể Gửi file đính kèm
  • Bạn Không thể Sửa bài viết của mình
  •